The laboratory workbench is one of the essential basic equipment for laboratories in various industries. It has a reasonably designed and aesthetically pleasing combination structure style, a solid and strong load-bearing main support frame, and is equipped with a fully functional water supply and drainage system, power control system, etc. The all steel laboratory workbench is a new generation of environmentally friendly products, non-toxic, odorless, and pollution-free, ensuring the safety and health of laboratory operators

1、 Table top section

The countertop is divided into phenolic resin board (solid core physical and chemical board), epoxy resin board, stainless steel board, marble board, etc

1. What table tops should be used for organic chemistry experiments? For your reference:

A. 1mm thick phenolic resin board, made by bonding and pressing with 25mm thick medium density fiberboard as the substrate, with a balance board attached to the bottom, with a total thickness of 27mm and a 2.0 thick PVC edge sealing

B. Using a 12.7mm thick phenolic resin board with edges on the bottom, with a total thickness of 25.4mm, the edges are polished and chamfered beautifully

C. Using 25mm thick epoxy resin board

2. The table top of Inorganic chemistry and physics experimental table is made of 1mm thick phenolic resin board, the base plate is made of 38mm thick moisture-proof and environment-friendly chipboard material, and the periphery is sealed with 2.0mm thick PVC material

3. The biological experimental table top is made of 1.2mm thick stainless steel plate, and the substrate is made of 30mm thick moisture-proof and environmentally friendly particle board. Its characteristics are easy to clean and wash, high temperature resistance, and certain corrosion resistance

2、 Framework section

1. The frame is made of 40 * 60 * 2mm and 30 * 50 * 2mm thick steel profiles welded together. After welding, the surface is polished to be very flat without any weld marks. The surface of the bracket is sprayed with epoxy resin powder

2. The front and rear connectors are made of 20mm thick metal cold-rolled sheet and bent, and connected to the main frame with M8 * 20mm screws. The surface is sprayed with epoxy resin powder

3. The maintenance channel is designed with a detachable and easy to maintain movable back plate, made of 1.0mm thick metal cold-rolled plate. The surface is treated and sprayed with epoxy resin powder

4. The rear and lower connecting pieces are made of 2.0mm thick metal cold-rolled plates, and multiple ventilation holes are designed below the connecting plate for easy air circulation. The surface of the connecting plate is treated and sprayed with epoxy resin powder

3、 Material Description of All Steel Cabinet Body

1. Cabinet side panels, top plates, partitions, and bottom plates: Made of 1.0mm thick metal cold-rolled sheets, processed and produced through stamping and bending processes, with epoxy resin powder spray coating on the surface

2. Drawer panel and door panel: Made of 1.0mm metal cold-rolled sheet by pressing and bending, with the surface sprayed with epoxy resin powder. The inner layer is equipped with noise reduction, silencing, buffering, and shock absorption devices

3. Drawer side plate and bottom plate: Made of 1.0mm metal cold-rolled plate by pressing and bending, with epoxy resin powder spray coating on the surface

4. The handle adopts a PVC material concave handle

4、 Material Description of Reagent Rack

It can be equipped with experimental water supply systems, electronic control systems, various experimental gas functions, and exhaust gas output systems. The reagent rack can adjust the height of the layer board to meet the storage of reagent bottles at various heights, with a stable structure and easy maintenance. Each connection section can bear up to 50-100kg

1. Support frame: Made of 1.5mm thick high-quality cold rolled sheet bent and welded, with an overall size of 40 * 75, and coated with epoxy resin powder on the surface

2. Laminate:

(1) Using 1.0mm thick phenolic resin board, the substrate is 16mm thick particle board, the bottom surface is glued with a balance board, and the surrounding area is sealed with PVC plastic

(2) 1.5mm thick cold-rolled steel plate, surface electrostatic powder spraying, corrosion resistant

(3) 10mm thick tempered glass laminate

3. Laminate accessories: namely the front edge of the laminate and the pallets on both sides. The front edge is made of 1.2mm thick high-quality cold rolled sheet, and the pallets on both sides are made of 2.0mm thick high-quality cold rolled sheet. The surface is coated with epoxy resin powder, and the front edge is designed with anti impact black rubber strips

4. Multi function trunking board: It is made of 1.0mm thick cold rolled plate by bending and welding, and its surface is sprayed with epoxy resin powder. It can be configured with laboratory special socket (voltage: 220V.10A, 16A), overload short circuit protector, electronic Pressure regulator, telephone interface, and network interface

5. Thread trough: Made of PVC special thread trough, directly introduced from the ground to the multi-functional electronic control board surface, connecting various functional configurations

6. Fasteners: All use black corrosion-resistant hex socket screws

5、 Accessories

1. Safe socket: Use a six hole laboratory dedicated socket, or customize and purchase according to the specific requirements of the laboratory

2. Power outage short circuit protector: The shell is designed and molded using fire-resistant and high-temperature resistant materials

3. Test faucet: The test faucet material is made of 2.5-3mm thick cast copper material, ceramic valve core, surface epoxy resin powder spray coating, copper pipe joint, water nozzle, and water nozzle configuration

a. Triple faucet: High faucet with pointed faucet, and low faucet with slow water faucet at both ends

b. Dual faucet: equipped with a slow flowing nozzle

c. Single faucet: It is a pointed faucet

d. The T-shaped and right angle faucets used in the cup slot are all pointed faucets

4. Sink: PP material with a thickness of 5mm, characterized by strong acid alkali resistance and corrosion resistance

6、 Configuration of laboratory faucets and sinks

a. Triple and double test faucets are equipped with a sink (outer diameter: 560 * 457 * 300mm)

b. Single link laboratory faucet with sink (outer diameter: 440 * 340 * 280mm)

c. T-shaped, right angle faucet with sink (outer diameter: 266 * 112 * 210mm)

5. Water supply accessories: use three faucets and copper connectors Sewer accessories: Made of PVC material and equipped with return bends

6. The experimental platform is equipped with adjustable combination anchors: composed of stainless steel screws, nylon covers, and rubber materials, which have the characteristics of anti slip, shock absorption, acid and alkali resistance, corrosion resistance, and strong load-bearing capacity

7. Hinge: Use high-quality 90 ° or 175 ° hinges produced by imported or joint venture factories

8. Drawer slide: Adopting high-quality manufacturer slide, with silent design and automatic homing function

9. Drip stand: Made of 12.7mm thick phenolic resin material combined with PP rod, can be configured according to usage requirements