Due to the unique working environment of laboratories, consumers tend to customize laboratory furniture, but improper customization of furniture can also bring many troubles to users.

1、 Designers are professional, give them the good news: Consumers should know that many designers are not as professional as you imagine. Some designers, in order to save time, often complete several plans to change the design size after conducting on-site investigations. However, the actual needs of consumers in different laboratories are also different. For example, whether the layout of the Fume hood in the laboratory can leave enough walking space and working space for the laboratory staff, and whether the anti-corrosion materials on the surface of the Fume hood in the laboratory can adapt to the working environment of the laboratory. Therefore, consumers should strictly check every link in the customization process, from product design to production, processing, installation and transportation, and contact the manufacturer in time in case of problems.

2、 The higher the wind speed, the better: This viewpoint occasionally appears in some customers, which is a misconception. Many consumers believe that the higher the wind speed on the surface of the Fume hood, the better. In fact, this is not the case. If the wind speed on the cabinet surface is too high, the type of Whole-house fan, the size of ventilation pipe and air conditioning equipment must also be increased, which not only increases the cost, but also increases the difficulty of installation and construction. In addition, the increase in exhaust and supplementary air equipment will inevitably generate greater noise and vibration during operation, and the investment in noise reduction and vibration reduction equipment will inevitably increase. Generally, the wind speed of 5m/s on the surface of Fume hood is sufficient.